| Autor: |
Xu, Wang, Zikry, Mohammed, Seyam, Abdel-Fattah M. |
| Předmět: |
|
| Zdroj: |
Journal of Composites Science; Jun2024, Vol. 8 Issue 6, p193, 20p |
| Abstrakt: |
This study uses the finite element method (FEM) to investigate the effect of key structural parameters on the impact resistance of E-glass 3D orthogonal woven (3DOW) composites subjected to low-velocity impact. These structural parameters include the number of y-yarn layers, the path of the binder yarn (z-yarn), and the density of the x-yarn. Using ABAQUS, yarn-level finite element (FE) models are created based on the measured geometrical parameters and validated for energy absorption and damage behavior from experimental data gathered from the previous study. The results from finite element analysis (FEA) indicate that the x-yarn density and the binder path substantially influenced the composites' damage behavior and impact performance. Increasing x-yarn density in 3DOW leads to a 15% increase in energy absorption compared to models with reduced x-yarn densities. Moreover, as the x-yarn density increases, crack lengths at the back face of the resin matrix decrease in the y-yarn direction but increase in the x-yarn direction. The basket weave structure absorbs less energy than plain and 2 × 1 twill structures due to the less constrained weft primary yarns. These results underscore the importance of these structural parameters in optimizing 3DOW composite for better impact performance, providing valuable insights for the design of advanced composite structures. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
