The Effect of Cr Addition on the Strength and High Temperature Oxidation Resistance of Y 2 O 3 Dispersion Strengthened Mo Composites.

Autor: Guan, Haochen, Lv, Chongshan, Ding, Qingming, Wang, Guangda, Xiong, Ning, Zhou, Zhangjian
Předmět:
Zdroj: Materials (1996-1944); Jun2024, Vol. 17 Issue 11, p2550, 13p
Abstrakt: Y2O3 dispersion-strengthened Molybdenum (Mo) composites were prepared by the mechanical alloying of Mo and Y powders then consolidation by spark plasma sintering. The effects of Chromium (Cr) addition (0 wt. %, 5 wt. %, 10 wt. % and 15 wt. %, respectively) on the mechanical performance and high-temperature oxidation resistance of Mo-Y2O3 were investigated. The introduction of Cr had a significant influence on the mechanical property and oxidation resistance of the Mo-Y2O3 composite. The highest bending strength reached 932 MPa when the addition of Cr content was 5 wt. % (Mo–5Cr–1Y sample). This improvement is likely attributable to the dual mechanism of grain refinement and solid solution strengthening. Moreover, the Mo–5Cr–1Y sample showed the thinnest oxide layer thickness after high-temperature oxidation tests, and exhibited the best oxidation resistance performance compared with the other samples. First principle calculation reveals that Cr could improve the Mo–MoO3 interface bonding to prevent rapid spalling of the oxide layer. Meanwhile, Cr also facilitates the formation of the dense Cr2(MoO4)3 layer on the surface, which can inhibit further oxidation. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje