| Autor: |
Oya-Monzón, Marina, Eliche-Quesada, Dolores, La Rubia, M. Dolores |
| Předmět: |
|
| Zdroj: |
Journal of Composites Science; May2024, Vol. 8 Issue 5, p188, 12p |
| Abstrakt: |
In order to reduce energy consumption in buildings, this study used olive pruning sawdust (OTPS) instead of natural sand in the production of lightweight mortars. Different percentages of natural sand substitution were tested: 0, 10, 25, and 50% by volume of sand over 7 and 28 days of curing time. Additionally, the influence of a chemical pretreatment in an aqueous solution of calcium hydroxide on the OTPS was also evaluated to mineralize the wood before its addition to the mortar mixture. Mortars with OTPS incorporations were characterized by volumetric shrinkage, bulk density, and capillary water absorption. Mechanical behavior was tested through compression and flexural tests. The addition of this byproduct decreased bulk density and increased mortar porosity. Pretreating olive pruning sawdust with an aqueous solution of calcium hydroxide was effective for wood mineralization, resulting in physical and mechanical properties superior to mortars without pretreatment. The results showed that a maximum addition of 10% by volume of OTPS treated with calcium hydroxide solution produced lighter mortars with similar mechanical properties to the control mortar. Adding higher amounts of pretreated olive pruning (25–50% by volume) led to a more pronounced deterioration of mechanical properties. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
