| Autor: |
Liu, Yilong, Zhu, Min, Lu, Xiaohan, Wang, Shengao, Li, Ziwei |
| Předmět: |
|
| Zdroj: |
Coatings (2079-6412); May2024, Vol. 14 Issue 5, p538, 19p |
| Abstrakt: |
In this study, based on the Iwan model, the connection interface of the bolted joint structure subjected to lateral loads was simulated and comparatively analyzed. Commercial finite element software was used to model the bolted joint structure. Monotonic lateral loads and cyclic displacement loads were applied to the model. The changes in the preload force of the bolted connection structure, as well as the changes in the sticking zone and stress state of the connection interface, were analyzed, and the loading results of monotonic load and cyclic displacement load were compared. The results show that the contact interface stress decreases with the increase in displacement load, and this increase is also a nonlinear relationship, which is approximately in phase with the trend of the contact surface slip curve. The amount of contact surface stress loss and the amount of preload loss are not directly related to the magnitude of the initial preload, regardless of the loading conditions. The contact surface is also circular under any form of displacement loading, whether it is stressed or slipped. The amount of preload loss is proportional to the amount of bolt compression for that variable. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
