| Autor: |
Azevedo, Cristiano B, Almeida Jr, José Humberto S, Lisbôa, Tales V, Scherer, Leonardo G, Spickenheuer, Axel, Amico, Sandro C |
| Předmět: |
|
| Zdroj: |
Journal of Reinforced Plastics & Composites; May2024, Vol. 43 Issue 9/10, p576-588, 13p |
| Abstrakt: |
In this paper, a novel hybrid manufacturing process that combines filament winding (FW) and tailored fiber placement (TFP) is introduced. The main idea is to place a TFP patch in between two filament wound layers aiming at maximizing the load transfer between the parts. To assess its feasibility, physical properties, such as density, fiber volume fraction and void content, and also the hybrid process kinematics and error propagation are evaluated. Furthermore, to determine the mechanical performance of this novel procedure, axial compression tests are carried out considering several unidirectional TFP patches. Key results show low-void content and good cross-section quality, demonstrating the feasibility of the process. In addition, mass–normalized load peaks as high as 394% with respect to the reference (non-patched) cylinder were obtained. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
