| Abstrakt: |
The development of electrochemical sensors operating at low potentials is a promising method for monitoring environmental toxicants. In this research study, we designed and synthesized a redox active material, ferrocene conjugated biphenyl pyridine acrylonitrile (Fc-BPy), and applied it for the low potential non-enzymatic detection of catechol (CC) through electrochemical technique. Fc-BPy was systematically characterised using single-crystal XRD (SC-XRD). Fc-BPy crystallizes in a triclinic crystal system with a P-1 centrosymmetric space group. The electrochemical investigation of the Fc-BPy/GCE modified electrode exhibits a well-defined redox peak at a low anodic (Epa) and cathodic (Epc) peak potential of 0.32 V and 0.21 V, respectively, which favours the non-interference and selective detection of CC. Furthermore, commendable conductivity was achieved in the absence of any other conducting material due to a profound charge transfer between Fc-BPy and the electrode surface. In amperometry, Fc-BPy/GCE shows excellent non-enzymatic electrocatalytic activity towards CC over a linear detection range from 20 μM to 1.02 mM. The sensitivity and limit of detection (LOD) of CC were found to be 36.42 mM μA−1 cm−2 and 6.2 μM, respectively. Additionally, the fabricated sensor showed consistent performance over multiple cycles and extended periods of storage. The practical utility of the sensor for the detection of CC was tested in various real-time samples. The results were astounding with good recovery rates. Thus, the fabricated sensor exhibits a striking performance for the non-enzymatic detection of CC at a low potential with a high sensitivity, selectivity, better linear range, and low limit of detection. [ABSTRACT FROM AUTHOR] |
