| Autor: |
Usman, Mukhamad Khumaidi, Syarifudin, Syarifudin, Akhmadi, Amin Nur |
| Předmět: |
|
| Zdroj: |
AIP Conference Proceedings; 2024, Vol. 3070 Issue 1, p1-3, 3p |
| Abstrakt: |
Carburization is done by heating at a high enough temperature at austenite temperatures in an environment that contains active zinc atoms, so that the active zinc atom will diffuse into the surface of the brass and reach a certain depth. After the fuscous is diffused, followed by a rapid cooling treatment (quenching), so that a harder surface is obtained, but clay and tough the middle. This study aims to determine the properties, especially the hardness and strength of carbon steel low after carburizing using coconut shell charcoal carburizing media. The method is brass carburizing using coconut shell charcoal with a temperature of 800 ⁰C with a holding time of 3 hours using oil, air and water cooling experienced the greatest change in mechanical properties in water cooling media, namely an increase of 67.647 % with a hardness value of 57 HRC. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
