Investigation of Sintering Process of Powder Steel SP60KhN4D2М with Various Plasticizers and Alloying Additives in Original Charge.

Autor: Eremeeva, Zh. V., Ter-Vaganyants, Yu. S., Sharipzyanova, G. Kh., Korznikov, O. V.
Zdroj: Inorganic Materials: Applied Research; Aug2023, Vol. 14 Issue 4, p1094-1101, 8p
Abstrakt: Regularities of sintering of molds made of alloyed powder mixtures with different plasticizers are studied. The following optimal technological parameters are established: a pressure of static cold pressing of 700 MPa, a temperature of isothermal exposure in a hydrogen atmosphere of 1000°C for 60 min, and an isothermal exposure in vacuum at 1250°C for 60 min. These parameters provide the best combination of properties of sintered powder steel. In addition, the microstructure of steel is studied by optical microscopy. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index