Autor: |
Jie, Hu, Paul, Nicaise, Faouzi, Boussaha, Jean-Marc, Martin, Christine, Chaumont, Alexine, Marret, Florent, Reix, Josiane, Firminy, Thibaut, Vacelet, Dung, Pham Viet, Michel, Piat, Elisabetta, Caffau, Piercarlo, Bonifacio |
Předmět: |
|
Zdroj: |
Journal of Low Temperature Physics; Feb2024, Vol. 214 Issue 3/4, p113-124, 12p |
Abstrakt: |
SpectroPhotometric Imaging in Astronomy with Kinetic Inductance Detectors (SPIAKID) aims at designing, building, and deploying on the sky a spectrophotometric imager based on microwave kinetic inductance detectors (MKIDs) in the optical and near-infrared bands. MKIDs show a fast response and the ability to resolve photon energy compared to the conventional Charge-coupled Devices (CCDs). In this paper, we present the design and simulation of the MKID arrays for SPIAKID. The detectors consist of four arrays with each array of 20,000 lumped-element pixels, and each array will be read with 10 readout lines. The meander material of the resonators is trilayer TiN/Ti/TiN to have better uniformity of the critical temperature across the array. We also present the measurement result for a test array with 30 × 30 pixels which is a subset of the designed 2000-pixel array to verify the design and fabrication. The current measured best energy-resolving power R = E / Δ E is 2.4 at λ = 405 nm and the current medium R is around 1.7. We have also observed that the response of the TiN/Ti/TiN is much smaller than expected. [ABSTRACT FROM AUTHOR] |
Databáze: |
Complementary Index |
Externí odkaz: |
|