| Abstrakt: |
A superconducting joint for multi-filamentary Bi2Sr2Ca2Cu3O10+ δ (Bi2223) tape, which has applications in nuclear magnetic resonance and magnetic resonance imaging, has been developed based on incongruent melting and multi-junction methods. In this study, the critical current limit, optimal oxygen annealing conditions, and reproducibility of this joint are experimentally evaluated. The results indicate that the critical current limit of the joint at 77 K is determined by that of the tape. The critical current limit was estimated to be about 40 A. Additional oxygen annealing after heat treatment below 1143 K. appears to have no effect on the critical current, and that above 1153 K slightly increases the critical current. It is found that the multi-junction method effectively increases the reproducibility of obtaining a high critical current. To obtain a high critical current at 77 K, the highest temperature in the joint creation process should be lowered to near the incongruent melting temperature of Bi2223 (about 1133 K in air). Two Bi2223 coils, each with one joint (four junctions), were prepared and their persistent current at 77 K was tested. A persistent current of above 20 A was measured with a resistance of about 10 pΩ. [ABSTRACT FROM AUTHOR] |
