| Abstrakt: |
Hydraulic jump is used for dissipation of kinetic energy downstream of hydraulic structures such as spillways, chutes, and gates. In the present study, the experimental measurements and numerical simulation of the free hydraulic jump by applying Flow-3D software in six different conditions of adverse slope, roughness, and positive step were compared. It should be noted that two turbulence models including k-ε and RNG were used for numerical simulation. Based on the results, simulation accuracy using the RNG model was more than the k-ε model. The statistical indices of NRMSE, ME, NS, and R² for comparing the water surface profile were obtained at 34.3, 0.0052, 0.995, and 983 for the application of the RNG model, respectively. Also, using the RNG model, the values of these indices for the velocity profile were obtained at 14.92, 0.127, 0.9982, and 962, respectively. In general, the error of the simulated water surface and velocity profile were obtained at 5.31 and 12.4 percent, respectively. Moreover, the maximum error of the numerical simulation results of D2/D1, Lj/D2, and Lr/D1 was ±12, ±12, and 16%, respectively. Therefore, the use of Flow-3D software with the application of the RNG turbulence model is recommended for numerical simulation of the hydraulic jump in different situations. [ABSTRACT FROM AUTHOR] |
