| Autor: |
Tkachuk, O. V., Pohrelyuk, I. M., Proskurnyak, R. V., Morgiel, J., Faryna, M., Goral, A. |
| Předmět: |
|
| Zdroj: |
Journal of Materials Engineering & Performance; Dec2023, Vol. 32 Issue 24, p11040-11049, 10p |
| Abstrakt: |
The porous hydroxyapatite coatings with a spherical structure were formed on commercially pure titanium (CP-Ti) by the micro-arc oxidation (MAO) in an alkaline electrolyte (hydroxyapatite + 1 M potassium hydroxide) at the applied voltage of 140, 160, 180 V and deposition time of 1 and 2 min. It was determined that by increasing voltage from 140 to 160 V the Ca/P ratio increases from 1.54 to 1.69, i.e., the composition of hydroxyapatite (HA) approaches to the biological one that accelerates formation of the interfacial bond between the implant and bone tissue. It was shown that increasing deposition time from 1 to 2 min at the voltage of 140 V promotes increasing Ca/P ratio. The corrosion resistance of CP-Ti with HA coatings was studied in Ringer's solution at a temperature of 37 °C. The best corrosion protection was observed for the coating deposited at 160 V, 1 min, when the thickness of the coating and HA formation is the highest. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink