Abstrakt: |
Regenerative braking technology is a viable solution for mitigating the energy consumption of electric vehicles. Constructing a distribution strategy for regenerative braking force will directly affect the energy saving efficiency of electric vehicles, which is a technical bottleneck of battery-powered electric vehicles. The distribution strategy of the front- and rear-axle braking forces of electric vehicles that possess integrated front-wheel-drive arrangements is established based on the Economic Commission of Europe (ECE) regulations, which enables the clarification of the total braking force of the front axle. The regenerative braking torque model of the motor is adjusted to optimize the ratio of motor braking force to the whole front-axle braking force. The regenerative braking process of electric vehicles is influenced by many factors, such as driving speed and braking intensity, so regenerative braking presents characteristics of nonlinearity, time variability, delay, and incomplete models. By considering the impact of fuzzy controllers having better robustness, adaptability, and fault tolerance, a fuzzy control strategy is employed in this paper to accomplish the regenerative braking force distribution on the front axle. A regenerative braking model is created on the Simulink platform using the braking force distribution indicated above, and experiments are run under six specific operating conditions: New European Driving Cycle (NEDC), World Light-Duty Vehicle Test Cycle (WLTC), Federal Test Procedure 72 (FTP-72), Federal Test Procedure 75 (FTP-75), China Light-Duty Vehicle Test Cycle-Passenger (CLTC-P), and New York City Cycle (NYCC). The findings demonstrate that in six typical cycling road conditions, the energy saving efficiency of electric vehicles has greatly increased, reaching over 15%. The energy saving efficiency during the WLTC driving condition reaches 25%, and it rises to 30% under the FTP-72, FTP-75, and CLTC-P driving conditions. Furthermore, under the NYCC road conditions, the energy saving efficiency exceeded 40%. Therefore, our results verify the effectiveness of the regenerative braking control strategy proposed in this paper. [ABSTRACT FROM AUTHOR] |