| Autor: |
Gu, Zheng, Wang, Siqi, Lu, Chungang, Song, Lei, Lu, Zhenghao, Chu, Yonghua, Yu, Xiaopeng |
| Předmět: |
|
| Zdroj: |
Journal of Electrical Engineering; Oct2023, Vol. 74 Issue 5, p413-421, 9p |
| Abstrakt: |
In this paper, the design methodology of a high-linearity wide-band transimpedance amplifier (TIA) for cable television (CATV) application is addressed. A simple four-stage topology is proposed to maintain a well-balanced linearity over a wide operating band. The regulated cascode (RGC) input stage is used to match an input impedance of 75 Ω, followed by a gain stage with enhanced bandwidth. The high-linearity output stage is able to drive the 75 Ω load directly with high output swing under a high supply voltage. The prototype is implemented with a standard 0.11μm CMOS process while occupying the silicon area of 0.034 mm2. The measurement results for the prototype show a peak gain of 76.6 dBΩ over a 3-dB bandwidth of 1.1 GHz with a considerably small gain ripple and an OIP3 of 20.4 dBm. The whole test chip consumes 447 mW DC power and the measured average input-referred noise current spectral density is 7.9 pA Hz−1/2 up to 1 GHz. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
