| Autor: |
Chen, Guan, Yao, Nan, Ye, Yicheng, Fu, Fanghui, Hu, Nanyan, Zhang, Zhen |
| Předmět: |
|
| Zdroj: |
Environmental Science & Pollution Research; Oct2023, Vol. 30 Issue 46, p102972-102985, 14p |
| Abstrakt: |
Phosphogypsum (PG) stockpiles occupied a large amount of land resources, and serious environmental pollution problems have attracted the attention of countries around the world. Cemented backfill can reduce the environmental problems caused by tailings stockpiles and is an important development trend in green mine construction. To investigate the effect of binder type on the performance of PG cemented backfill, this paper used ground granulated blast furnace slag (GGBFS) to substitute part of Portland cement (PC) as binder and studied the effect of different ratios of binder on the uniaxial compressive strength (UCS), surface crack extension, acoustic emission (AE) characteristics, and microstructure of PG cemented backfill. The results show that substituting part of PC with GGBFS is beneficial to improve the mechanical properties of PG cemented backfill. When PC was substituted by 50% of GGBFS, the 28d UCS of the backfill was increased from 1.535 to 4.539 MPa. Furthermore, the UCS of the backfill gradually increased as the GGBFS substitution level increased, and more AE signals could be monitored during uniaxial compression. Compared with PC, the sulfate in PG participates in the hydration reaction of GGBFS, more hydrated calcium-aluminum-silicate-hydrate (C-A-S-H) gels and ettringite (AFt) are formed, and the microstructure of the backfill is denser, and the required strength can be obtained with less binder. Thus, substituting part PC with GGBFS as a binder can provide an economical and environmentally friendly alternative for the consumption and reuse of large quantities of PG. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink