| Autor: |
Arsenault, A., Charpentier-Pépin, B., Forcier, A., Nassiri, N., Bellemare, J., Lacroix, C., Ménard, D., Sirois, F., Bernier, F., Lamarre, J.-M. |
| Předmět: |
|
| Zdroj: |
Review of Scientific Instruments; Aug2023, Vol. 94 Issue 8, p1-9, 9p |
| Abstrakt: |
This work presents the design and validation of a vibrating coil magnetometer for the characterization of the field dependence of the critical current density of centimeter-sized bulk superconductors as an alternative to the destructive methods typically used. The magnetometer is also shown to be capable of measuring the magnetic moment in an applied field of up to 5 T for diverse magnetic materials, such as soft and hard ferromagnets and high-temperature superconducting pellets. The vibrating coil magnetometer was first optimized using finite element simulations and calibrated using a commercial vibrating sample magnetometer. The vibrating coil magnetometer was benchmarked with hysteresis measurements of a Nd2Fe14B disk made with a commercial hysteresisgraph, showing good agreement between the different setups. The magnetic hysteresis of a YBa2Cu3O7−x superconducting pellet was measured at 77 K, showing a penetration field of 1 T and an irreversibility field of 4 T. The field dependent critical current density of the superconductor was then inferred from the magnetic hysteresis measurements and extrapolated at low fields. Finally, the resulting critical current density was used to successfully reproduce the measured magnetization curve of the pellet at 2 T with finite element simulations. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
