Abstrakt: |
A thermal model was built to estimate the temperature distribution in the hemispherical packaging volume of a white LED at a steady state. Inherent heat sources appeared in the white LED when its power was measured. A simplified 3D to 2D space process that improves the model and solves the heat diffusion equation in a simpler and faster manner is presented. The finite element method was employed using MATLAB software (version R2017b) to identify the temperature distribution. The model was applied for different values of injection current, including 50 mA, 200 mA, 350 mA, and 500 mA. The influence of the injection current and thermal conductivity difference on the temperature distribution of the encapsulant, blue LED die, and substrate region was clearly observed. The results indicate that white light packaging technology should locate phosphor far from the LED die, that the thermal conductivity of the silicone–phosphor region should be improved, that heat should be dissipated for pc-WLEDs when using a high operating power, and that the injection current should be kept as moderate as possible. [ABSTRACT FROM AUTHOR] |