| Abstrakt: |
The purpose of this research was to evaluate the refining of used lubricating oils (ULOs), and their possible use as drilling fluids. 17 treatments were evaluated and sulfuric acid and nonylphenol were used as reagents at concentrations of 0.12, 0.24 and 0.36 g/mL and temperatures of 40, 60, 80 and 100 °C. AT80 and AT100 ULOs treated at 80 and 100 °C without reagents, presented an average density of 0.84 g/cm-3, a viscosity of 76.3 and 75.3 cP, an electrical stability of 1,731.3 and 1,394.6 V and a flash point of 183 and 190 °C as higher. The ST40C1 and ST40C2 treatments, added with reagents, showed similar results to AT80 and AT100 in the evaluated variables, but they are more expensive treatments. According to the results, it is concluded that the refined ULO can be a substitute for the oil used in the formulation of oil-based drilling fluids. [ABSTRACT FROM AUTHOR] |
