| Autor: |
Lu, Zhenchuan, Tuokedaerhan, Kamale, Cai, Haotian, Du, Hongguo, Zhang, Renjia |
| Předmět: |
|
| Zdroj: |
Coatings (2079-6412); Jun2023, Vol. 13 Issue 6, p1085, 12p |
| Abstrakt: |
This article presents the sol-gel method for depositing La2O3 thin films on n-type Si substrates and quartz substrates, and investigates the impact of annealing temperature on the microcomposition, surface morphology, optical properties, and band characteristics of the films. X-ray diffraction (XRD) analysis indicates that the films are amorphous below 500 °C, with annealing resulting in a hexagonal-phase La2O3 (h-a2O3) and new non-hydrated impurities. Fourier-transform infrared (FTIR) analysis reveals that the prepared La2O3 film is unaffected by moisture. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) provide evidence that the La2O3 film has a smooth, uniform surface without cracks. The roughness increases from 0.426 nm to 1.200 nm, and the film thins from 54.85 nm to 49.80 nm as the annealing temperature rises. The film's transmittance is above 75%, as measured by UV-Vis, and the calculated optical bandgap increases from 5.11 eV to 5.75 eV. The calculated band offset of the La2O3 film is greater than 1 eV, which meets the minimum requirements for MOS devices, thus providing promising prospects for La2O3 films in MOS applications. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
