| Autor: |
Ould Mohamed, Ouarda, Azzeddine, Hiba, Huang, Yi, Baudin, Thierry, Bazarnik, Piotr, Brisset, François, Kawasaki, Megumi, Langdon, Terence G. |
| Předmět: |
|
| Zdroj: |
Advanced Engineering Materials; Jun2023, Vol. 25 Issue 11, p1-18, 18p |
| Abstrakt: |
High‐pressure torsion (HPT) processing is successfully applied to fabricate a novel hybrid material from separate discs of AZ31 (Mg–3Al–1Zn, wt%) and Mg–0.6Gd (wt%) alloys by straining through numbers of rotations, N, of 1/4, 1/2, 5, 10, and 20 turns at room temperature. The microstructure and texture are investigated near the bonding interface through the disc diameter using electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The microstructure exhibits two grain refinement regimes with the first occurring during an equivalent strain range, εeq, of ≈0.3–72 and the second during εeq from ≈72 to 517. The general texture changes from B‐fiber to Y‐fiber and C2‐fiber through the HPT processing. The resultant microstructures and textures of this hybrid alloy are examined separately for the AZ31 and Mg‐0.6Gd alloys and found controlled by the presence of twinning, slip systems, and second phases and the occurrence of different dynamic recrystallization mechanisms. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Plný text