| Autor: |
Noor, Rizal Mohamed, Zubair, Ahmad Faiz, Zulkifli, Abdul Halim, Hemdi, Abdul Rahman, Kataraki, Pramodkumar |
| Předmět: |
|
| Zdroj: |
Journal of Mines, Metals & Fuels; Oct2022, Vol. 70 Issue 10A, p173-176, 4p |
| Abstrakt: |
In the machining industry, reducing energy consumption at a maximal material removal rate (MRR) has long been a priority. Using the response surface method, a predictive model has been proposed for the minimal power consumption in side-milling machining. Using response surface method (RSM), the effect of cutting parameters such as feed rate, spindle speed, and radial depth of cut on power consumption was investigated. The results revealed that feed rate is the most inûuential parameter for power consumption. The higher feed rate, the shorter cycle time thus reduce the power consumption. Based on the optimization model, minimum power consumption of 82.38 kW can be achieved at feed rate = 6,000 mm/in, radial depth of cut of 0.3 mm and spindle speed 12,000 rpm. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
