| Autor: |
Roark, Julie, Thomas, Frank D., Sockalingam, Subramani, Kempf, Julia, Christy, Dan, Haas, Derek, O'Brien, Daniel J., Senecal, Kris J., Crittenden, Scott R. |
| Předmět: |
|
| Zdroj: |
Fibers; Jan2023, Vol. 11 Issue 1, p7, 21p |
| Abstrakt: |
This work reports yarn pull-out studies of commercially available Kevlar® KM2+ individual yarns coated with metallic layers (copper, aluminum, aluminum nitride and silver) via a directed vapor deposition process. The uncoated control and metal-coated Kevlar® yarns are hand-woven into fabric swatches for quasi-static pull-out experiments. To perform these experiments, a yarn pull-out fixture is custom-designed and fabricated to apply transverse pre-tension to the fabric. Three levels of transverse pre-tensions are studied at 100 N, 200 N, and 400 N. The results showed that both peak pull-out force and energy absorption during the pull-out process increase with increase in transverse pre-tension. All the metal-coated groups showed an approximately 200% increase in peak pull-out force and a 20% reduction in tenacity compared to uncoated control. Furthermore, all the metal-coated groups showed an increase in energy absorption, with aluminum-coated yarns showing the highest increase of 230% compared to control. These results suggest enhanced frictional interactions during yarn pull-out in metal-coated yarns compared to uncoated control as evidenced by the surface roughness profile of individual fibers and inter-yarn frictional calculations. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
