| Autor: |
Sayam, Abdullah, Rabbi, Fogla, Hossain, Mohammad, Faruque, Omar, Ahmed, Nazir, Alimuzzaman, Shah, Ahmed, Faisal, Islam, Reajul, Rahman, A. N. M. Masudur |
| Předmět: |
|
| Zdroj: |
Journal of Natural Fibers; 2022, Vol. 19 Issue 14, p8923-8936, 14p |
| Abstrakt: |
Keywords: Woven fabric; denting; reed; appearance; performance properties; ANOVA; ; ; ; ; ; EN Woven fabric denting reed appearance performance properties ANOVA ZH 8923 8936 14 11/21/22 20221220 NES 221220 Introduction Woven fabric is produced by three successive fundamental operations where beat up is the final operation among them. Tensile strength results of warp and weft direction of all samples Maximum tensile strength at both warp and weft direction was found to be 388.81 N and 343.67 N respectively for sample 1. For samples 2, 3 and 4, values of tensile strength were 359.55 N, 317.60 N, and 288.50 N respectively at warp direction; and correspondence tensile strength for the samples at weft direction were 322.73 N, 312.12 N, and 275.34 N. There was vivid discrepancy for elongation (%) at maximum force between warp and weft direction. [Extracted from the article] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
