| Abstrakt: |
The current work presents a parametric study for twenty-five reinforced concrete overhang curved deep beams using finite element analysis. The parameters that were taken into consideration are radius, height, width, compressive strength of concrete and number of supports. It is found that the max positive moments increase by about 2.8-4.4% when decreasing the radius of beam by about 16-33%. The max negative bending moment, max torsional moments and max deflection decrease by about 1.9-12.4%, 0.4-8.9% and 30-87%, respectively, when beam radius decreases by 16-66%, whereas load capacity increases by about 23-195%. The max positive bending moment, max negative bending moment, torsional moment and load capacity increase by about 32-128%, 30-124%, 31-125% and 31-127% respectively, when the beam height increases by 12.5-100%, while deflection decrease by about 9-18%. The max positive bending moment, max negative bending moment, torsional moment, load capacity and max deflection increase by about 32-147%, 29-134%, 30-138%, 32-146% and 1.2-4.9%, respectively when beam width increases by 12.5-50%. The max positive bending moment, max negative bending moment, torsional moment, load capacity and max deflection increase by about 17-70%, 15-61%, 15-63%, 17-69% and 0.1-0.4%, respectively, when concrete compressive strength increase by 33-166%. Finally, it is found that the max positive bending moment increases by about 32% when increasing number of supports by 33%. Max negative bending moment and capacity of load increase by about 17-60% and 106-763%, respectively, when number of supports increases by 33-133%. Torsional moment and max deflection decrease by about 0.8-16% and 29-78%, respectively when number of supports increases by 33-133%. [ABSTRACT FROM AUTHOR] |
