| Autor: |
Shoaib, Shahrukh, El-Maaddawy, Tamer, El-Hassan, Hilal, El-Ariss, Bilal, Alsalami, Marwa |
| Zdroj: |
Sustainability (2071-1050); Nov2022, Vol. 14 Issue 21, p14267, 23p |
| Abstrakt: |
This study aims to examine the impact of using basalt macro-fibers (BMF) on characteristics of concrete made with recycled concrete aggregates (RCA). Test variables included the initial concrete grade (normal- and high-strength concrete (NSC and HSC)), RCA replacement percentage (30 and 60%), and BMF volume fraction (νf = 0.5 to 1.5%). The compressive strength reduction in the plain concrete caused by RCA was sensitive to the RCA replacement percentage rather than the initial concrete grade. The splitting and flexural strength reductions of the plain HSC caused by RCA were more significant than those of their NSC counterparts. The use of BMF compromised the concrete workability. Such a detrimental effect increased with the BMF content and was more pronounced for the HSC with 60% RCA. Reinforcing of RCA-based concrete with BMF tended to improve the mechanical properties. In some instances, the use of BMF at νf > 1% caused a decay in the strength gain. The addition of BMF to RCA-based concrete had a potential to fully restore the original splitting and flexural strengths of plain concrete mixtures made with natural aggregates (NA). The increase in the compressive strength of the RCA-based concrete caused by BMF was, however, not sufficient to fully restore the original strength of the NA-based plain concrete. The resistances to water penetration and abrasion of the RCA-based concrete improved by up to 17% and 47%, respectively, due to the addition of BMF. Idealized tensile softening laws were established for RCA-based concrete reinforced with BMF. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
