Photocatalytic Evaluation of TiO x Films Produced by Cathodic Arc-PVD with Silver Addition by UVC Photo-Reduction Method.

Autor: Raya-Tapia, Alma Yunuen, Ung-Medina, Francisco, Mondragón-Rodríguez, Guillermo César, Rivera-Muñoz, Eric Mauricio, Apolinar-Cortés, José, Méndez, Franklin J., Huirache-Acuña, Rafael
Předmět:
Zdroj: Inorganics; Oct2022, Vol. 10 Issue 10, p148-N.PAG, 20p
Abstrakt: A titanium (Ti) commercial cathode material and high purity Ar and O2 were used in the cathodic arc physical vapor deposition (arc-PVD) process. The TiOx coating was deposited on the three sets of Raschig rings using decreasing ratios of Ar/O2:440/60, 400/100 and 300/100. The cross sections of the TiOx PVD coating were analyzed using field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). A homogeneous layer of Ti with small O content was observed, and the data suggest that a thin TiOx oxide film was deposited. For this reason, a thermal treatment was applied to the coating to oxidize it and form the rutile phase of TiO2 in the coating, which was demonstrated by grazing incidence XRD. In addition, the TiOx coatings absorb radiation, which was observed by diffuse reflectance band gap energy measurement. Silver (Ag) was added by the photo-reduction method, using UVC light to activate the TiO2 coating, and the band gap energy was analyzed by diffuse reflectance. The photocatalytic activities of the films were evaluated by degradation of the model dye rhodamine B and in the removal of fecal coliforms using two matrices, water from a secondary treatment effluent, and synthetic water. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje