| Abstrakt: |
Corner accuracy occurring in wire electrical discharge machining (WEDM) is influenced by machining parameters such as wire vibration, wire lag, and excessive discharge, etc. This study proposed an optimization method which can improve the corner accuracy of the WEDM process. The parameters of pulse-on time (ON), pulse-off time (OFF), open circuit voltage (OV), servo voltage (SV), wire tension (WT), and flushing pressure (WA) were selected to investigate the influences of the major parameters on the machining accuracy in this study. Three different corner angles of 30°, 60°, and 90° were chosen for the verification experiments. The response surface methodology (RSM) was used to analyze and investigate the effect of each parameter on the corner error. After integrating the response surface value and algorithm, an optimization system with a friendly human–machine interface, which has a procedure guiding function, was developed with use of C# language. The system can predict the corner error and also recommend optimal machining parameters for smaller corner error and faster machining speed based on the original machining parameters. Finally, cutting experiments were conducted to verify the proposed system, and the results showed that the proposed method can effectively improve the corner accuracy by 39%, 20%, and 33%. [ABSTRACT FROM AUTHOR] |
