| Autor: |
Olaoye, Toba Samuel, Dewsbury, Mark, Wallis, Louise, Küenzel, Hartwig |
| Předmět: |
|
| Zdroj: |
CivilEng; Sep2022, Vol. 3 Issue 3, p687-716, 30p |
| Abstrakt: |
The study investigates through hygrothermal modelling the effect of different boundary conditions and varying measured vapour diffusion resistivity values on the hygrothermal performance of five pliable membranes. Previously, this research quantified the variable water vapour diffusion resistivity properties of five different pliable building membranes. The membranes were assessed under varying humidity conditions using the gravimetric wet and dry cup test method. The varying humidity conditions better represent the boundary conditions experienced by materials in the building envelope. The pliable membranes include two permeable, two impermeable, and one variable products, which are commonly used to provide air and vapour control layers in the construction of framed external wall systems. This article focusses on the transient hygrothermal modelling of each of these membranes as a component of a typical timber-framed, clay brick veneer external wall system. The simulations were completed for three different climate types, namely, hot and humid, temperate, and cool-temperate with snow, and with a northern and western orientation. The results from hygrothermal and bio-hygrothermal simulations highlighted different responses subject to climate type and orientation. These results show that there are significant differences in simulated moisture and mould growth risk between the results of pliable membranes with single vapour resistance factor value and pliable membranes with multipoint vapour resistance factor values. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
