| Autor: |
Song, Dongsong, Liu, Hongshuai, Sun, Qiangqiang |
| Předmět: |
|
| Zdroj: |
Applied Sciences (2076-3417); Sep2022, Vol. 12 Issue 17, p8690, 18p |
| Abstrakt: |
It has long been known that the hysteresis loops of sand under cyclic loading gradually become asymmetric with the increase of strain amplitudes, but a symmetrical hysteresis loop is widely assumed in current practice. Despite several methods which have been proposed recently to consider the hysteresis loop irregularities, previous research has lacked a quantitative study on the effects of determination methods on the shear modulus G and modulus reduction curve G/Gmax. The primary objective of the current study is to evaluate the uncertainties associated with the shear modulus measurements introduced by four determination methods. Reconstituted sand specimens prepared at three relative densities are tested using strain-controlled cyclic triaxial tests, at various effective confining pressures. The results in terms of G and G/Gmax with increasing shear strain are presented, following by the difference quantification in the calculated G/Gmax caused by the determination methods, the Gmax definition and the cycle number. The results show that the calculated G/Gmax may differ significantly for the same hysteresis loop, with a maximum percentage change of 40~50%. The aggravated influence at low confining pressure highlights that careful consideration of the asymmetrical hysteresis loop at large strains is warranted. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
