| Autor: |
bhadviya, Shruti, Rao, Vinita Kunwar, Suhalka, Riya, Tailor, Ritik, vyas, Manish, paliwal, Suraj |
| Předmět: |
|
| Zdroj: |
International Journal of Advanced Research in Computer Science; 2022 Special Issue, Vol. 13, p83-86, 4p |
| Abstrakt: |
The main idea of the project is to develop smart energy meter for an automatic metering and billing System. A digital smart prepaid energy meter can reduce the harassment of a consumer and effort of vendors over the traditional physical energy meter reading, billing process and electricity theft can be detected and prevented. The proposed system is implemented using a GSM shield module on microcontroller (Arduino UNO) together with Optocoupler and relay. In this meter energy utilized and the corresponding amount will be displayed on the LCD continuously and communicated to the controlling base station. . The main power passes through a relay to the consumer. The disconnection of power supply on demand or due to zero or low balance was implemented using a relay. The detail of power displaced in the energy meter is transferred to the mobile phone of consumer and updated at server of service provider using GSM and it also shows the units consumed by the load and available balance. If the available balance is reduced to certain limit then an alert message will be sent on consumer's mobile phone and after alert message if balance reaches below the set limit for power cut then the system automatically cut the power supply by triggering relay. On successful recharge the power supply will be turned ON by the system. The proposed system replaces traditional meter reading methods and enables remote access of existing energy meter by the energy provider. This smart energy meter is developed by using low-cost components that are available at the local market. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
