| Autor: |
Ávila Calderón, Luis Alexander, Graf, Benjamin, Rehmer, Birgit, Petrat, Torsten, Skrotzki, Birgit, Rethmeier, Michael |
| Předmět: |
|
| Zdroj: |
Advanced Engineering Materials; Jun2022, Vol. 24 Issue 6, p1-15, 15p |
| Abstrakt: |
Laser powder‐based directed energy deposition (DED‐L) is increasingly being used in additive manufacturing (AM). As AM technology, DED‐L must consider specific challenges. It must achieve uniform volume growth over hundreds of layers and avoid heat buildup of the deposited material. Herein, Ti–6Al–4V is fabricated using an approach that addresses these challenges and is relevant in terms of transferability to DED–L applications in AM. The assessment of the obtained properties and the discussion of their relationship to the process conditions and resulting microstructure are presented. The quality of the manufacturing process is proven in terms of the reproducibility of properties between individual blanks and with respect to the building height. The characterization demonstrates that excellent mechanical properties are achieved at room temperature and at 400 °C. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Plný text