| Abstrakt: |
Advanced oxidation processes have been used for wastewater treatment due to their capacity to reduce the organic loading and for their fast reactions. In this paper, we explore the viability of isolated and sequential use of electrochemical oxidation and Fenton processes into treatment of real raw urban sewage. The electrochemical process was carried out using DSA®-Cl2 electrodes and factorial planning in order to investigate the influence of pH, current density, and electrolyte. Fenton reaction was also used and H2O2 and Fe2+ concentration effects were investigated. The efficiency was estimated by chemical oxygen demand (COD) removal and in the optimized conditions the effluent was characterized by turbidity, suspended/dissolved/total solids, ammonia, chloride ions, free chlorine, nitrite, and potassium analysis and bioassays with Artemia ssp. and Lactuca sativa. The study demonstrated that the use of electrochemical technique followed by Fenton allowed an improvement in the degradation of organic matter and reduction of turbidity and solid content, reaching reductions of 86.8, 96.4, 99.4, 56.1, and 66.7% for COD, turbidity, SS, DS, and TS, respectively. The associated treatment also contributed to the reduction of energy consumption by 74.9%, from the 23.9 kWh m−3 observed during the electrochemical treatment isolated to the 6 kWh m−3 during the associated process. All the treatments presented toxicity reduction, with the electrochemical process achieving the best results. [ABSTRACT FROM AUTHOR] |
Full text from SpringerLink