| Autor: |
Muthu, S M, Dinek, R, Mohan, P, Jithesh, K, Arivarasu, M |
| Zdroj: |
Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.); Apr2022, Vol. 236 Issue 2, p308-320, 13p |
| Abstrakt: |
This present research work focuses on the hot corrosion performance of the base metal, weldment, and weld metal of A-286 alloy in sodium sulphate (Na2SO4)–5% sodium chloride (NaCl)–7.5% sodium metavanadate (NaVO3) (3SM) atmosphere at 700 °C. A pulsed current gas tungsten arc welding process is employed to make a similar joining of A-286 alloy using the filler material ERNiCrMo-3. The corrosion kinetics of the specimens has been determined using the thermo-gravimetric technique. The phase compositions of the reaction products are studied by X-ray diffraction, and the surface morphology of the scales is explored by scanning electron microscope analysis. The corroded samples are subjected to a cross-sectional study to ensure the corrosion attack and scales thickness using a SEM with elemental mapping technique. The result indicates that weldment showed better corrosion resistance than bare metal. A thick oxide scale could be found in the bare metal specimen than the weld metal. In the case of base metal, the formation of non-adherent and porous iron (III) oxide (Fe2O3) leads to rapid corrosion. The weight gain of weldment is about 1.96 and 1.13 times less than bare alloy and weld metal. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
