| Autor: |
Masry, Botros A., Shahr El-Din, Ahmed M., Al-Aidy, Hend A. |
| Předmět: |
|
| Zdroj: |
Separation Science & Technology; 2022, Vol. 57 Issue 4, p603-618, 16p |
| Abstrakt: |
The modification of the polysaccharides as a significant route to alter the physical and chemical properties via Ceric-initiated graft copolymerization of Acrylonitrile (AN) onto Carboxymethyl cellulose (CMC) was performed under inert atmosphere using ceric ammonium nitrate (CAN) as an initiator to prepare CMC-g-PAN copolymers. In this respect, NaOH solution hydrolyzed the graft copolymer, CMC-g-PAN, to obtain hydrolyzed CMC-g-PAN hydrogel, in which the CMC-g-PAN nitrile groups were totally transformed into a combination of hydrophilic carboxamide and carboxylate groups (H-CMC-g-PAN). Pure CMC and grafted copolymers structure were identified by an analyzation of FTIR spectral data, TGA, SEM and XRD. These biodegradable and low-cost graft copolymers, with improved features could really be utilized as promising adsorbents for separation and recovery of some metal values from different media. H-CMC-g-PAN was implanted for the effective separation of Zr(IV) and Nb(V) from nitric acid solution and the batch experimental results indicate that the extraction percentage by adsorbent gradually decreased by raising the HNO3 molarity. The calculated maximum capacity of H-CMC-g-PAN is 10.56 mg.g−1 Zr(IV) and 14.07 mg.g−1 Nb(V) under the used experimental conditions. Desorption investigation shows that the maximum desorption of Zr(IV) and Nb(V) was achieved with 1 M HCl, while selective stripping of Niobium was carried out using 1 M sodium hydroxide. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
