| Autor: |
Kozlov, Leonid, Buriennikov, Yurii, Rusu, Oana, Pyliavets, Volodymyr, Kovalchuk, Vadym, Petrov, Oleksandr, Rusu, Ioan |
| Předmět: |
|
| Zdroj: |
International Journal of Modern Manufacturing Technologies (IJMMT); 2021 Special Issue, Vol. 13, p79-86, 8p |
| Abstrakt: |
Hydraulic systems based on adjustable pumps, proportional electrohydraulic equipment and controllers are used in mobile machines. The authors propose a new scheme of the hydraulic system for mobile machines, which provides the auger drilling operation. A number of studies have shown that a certain ratio should be maintained between the frequency of auger rotation and its feed during operation, where the productivity of soil disruption should not exceed the productivity of transporting loose soil from the drilling zone. Ensuring the required ratio between the speed of the auger rotation and its feed is implemented by a controller that works according to a certain algorithm. A nonlinear mathematical model of the hydraulic system was developed to create the algorithm for controller operation and setting. The equations of the mathematical model are solved in the MATLAB-Simulink environment by the Rosenbrock method. As a result of solving the equations for the mathematical model, the dependences of variables describing the state of the hydraulic system on time are obtained. The values of the controller settings are determined at which the hydraulic system works steadily, the error of flow rate stabilization, the time for pressure adjustment and readjustment does not exceed the allowable values. The algorithm for controlling the auger feed value is formed. This algorithm provides the necessary ratio between the auger feed and speed, as well as reducing the feed rate in the case of soil hardness increases. This creates the conditions for uninterrupted pit drilling at full depth and protection of the hydraulic system from overload. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
