| Autor: |
Huang, Yu-Chun, Chuang, Ricky Wenkuei, Lin, Keh-Moh, Wu, Tsung-Chieh |
| Předmět: |
|
| Zdroj: |
Coatings (2079-6412); Dec2021, Vol. 11 Issue 12, p1450-1450, 1p |
| Abstrakt: |
In this study, a self-developed atmospheric pressure atomic layer deposition (APALD) system is used to deposit Al2O3 passivation film, along with the use of precursor combinations of Al(CH3)3/H2O to improve its passivation characteristics through a short-time microwave post-annealing process. Comparing the unannealed and microwave-annealed samples whose temperature is controlled at 200–500 °C, APALD non-vacuum deposited film can be realized with a higher film deposition rate, which is beneficial for increasing the production throughput while at the same time reducing the operating cost of vacuum equipment at hand. Since the microwave has a greater penetration depth during the process, the resultant thermal energy provided can be spread out evenly to the entire wafer, thereby achieving the effect of rapid annealing. The film thickness is subsequently analyzed by TEM, whereas the chemical composition is verified by EDS and XPS. The negative fixed charge and interface trap density are analyzed by the C-V measurement method. Finally, the three major indicators of τeff, SRV, and IVoc are analyzed by QSSPC to duly verify the excellent passivation performance. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
