Cathode temperature measurement of a hydrogen self-field MPD thruster during 1 ms quasi-steady operation.
Autor: | Oshio, Yuya, Tauchi, Shitan, Kawasaki, Akira, Funaki, Ikkoh |
---|---|
Předmět: | |
Zdroj: | Journal of Applied Physics; 11/7/2021, Vol. 130 Issue 17, p1-10, 10p |
Abstrakt: | In this study, a 2D two-color pyrometer was developed to measure the cathode surface temperature distribution of a high-power hydrogen magnetoplasmadynamic thruster. The developed measurement system consists of an object lens, a beam splitter, bandpass filters, and two cameras. Wavelengths of 950 and 980 nm were selected to achieve a high signal-to-noise ratio by reducing the effects of plasma radiation. The cathode temperature distribution was measured in a discharge current range of 6–13 kA during approximately 1 ms quasi-steady operation. A spot-like high-temperature region over 3000 K and an overall low temperature were observed at low discharge currents. The overall cathode tip region was heated to approximately 2800 K at high discharge currents. The temperature distribution with high temperature only near the cathode tip was measured during quasi-steady operation, the duration of which is shorter than the duration of thermal conduction. These results show that the discharge current distribution near the cathode is stable during the time scale of sub-milliseconds. We confirmed that this temperature distribution remains constant during a 1 ms duty cycle through cathode temperature measurements at each operation time with a 0.2 ms exposure time. The measurement error was approximately 10% of the calculated temperature; a cross-check was performed utilizing near-infrared spectrum measurements. [ABSTRACT FROM AUTHOR] |
Databáze: | Complementary Index |
Externí odkaz: |
načítá se...