| Autor: |
Risteska, Svetlana, Samak, Samoil, Samak, Vele |
| Předmět: |
|
| Zdroj: |
Journal of Composites Science; Oct2021, Vol. 5 Issue 10, p1-15, 15p |
| Abstrakt: |
During LATP (laser automated tape placement), the compaction roller contacts the prepreg and affects the pressure distribution directly. Moreover, the design parameters of the roller are optimized with the aim of improving pressure uniformity. This paper examines the impact of the contact line and surface that depends on the compaction force, the design of the roller, the angle of inclination and the angle of inclination of the strip. These factors significantly affect the expansion of the tape, and it is important to determine it to avoid side effects in the production of composites (formation of gaps or overlaps). Their presence increases the percentage of pores of the final material and thus reduces the mechanical properties. The results show that the pressure uniformity can be improved significantly by design optimization of the roller, which indicates that higher bond quality between layers is achieved. The lower the speed and higher the compact force in this technology give better intimate contact with a lower percentage of voids and good mechanical characteristics. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
