Fabrication and Testing of 18-mm-Period, 0.5-m-Long Nb3Sn Superconducting Undulator.

Autor: Kesgin, Ibrahim, Kasa, Matthew, MacDonald, Stephen, Ivanyushenkov, Yury, Barzi, Emanuela, Turrioni, Daniele, Arbelaez, Diego, Hasse, Quentin, Zlobin, Alexander V., Prestemon, Soren, Gluskin, Efim
Předmět:
Zdroj: IEEE Transactions on Applied Superconductivity; Jun2021, Vol. 31 Issue 4, p1-5, 5p
Abstrakt: The Advanced Photon Source at Argonne National Laboratory, in collaboration with FNAL and LBNL, is developing a Nb3Sn superconducting undulator with the goal of installing this device on the APS storage ring and providing APS users with the novel radiation source. A series of short, ∼8-cm-long, 18-mm-period undulator prototype magnets have been designed, fabricated, and tested. The same design was scaled to fabricate a 0.5-m-long undulator prototype. Tests of this prototype showed that the designed peak magnetic field of 1.2 T at 850 A was successfully achieved. It represents at least a 20% improvement in comparison with a NbTi SCU having the same period and magnetic gap. Test results and lessons learned from the design process are reported. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index