Autor: |
Hasibuan, Arnawan, Isa, Muzamir, Yusoff, Mohd Irwan, Rahim, Siti Rafidah Abdul, Nrartha, I. Made Ari, Rahim, Shayfull Zamree Abd, Saad, Mohd Nasir Mat, Abdullah, Mohd Mustafa Al Bakri, Tahir, Muhammad Faheem Mohd, Mortar, Nurul Aida Mohd |
Předmět: |
|
Zdroj: |
AIP Conference Proceedings; 2020, Vol. 2339 Issue 1, p1-8, 8p |
Abstrakt: |
The main purpose of this paper is to analyze the impact of different positions of different DG penetrations on bus voltage profiles and channel power losses. The main classification can be done by putting DG on the most critical bus, the closest bus to the most critical but critical bus too, the closest bus to the feeder but critical too, and the furthest from the feeder but critical too. Installing a distributed generation in a distribution network can significantly affect the power system. The effect depends on DG allocation of the distribution network. Implementation of this approach has been made with the IEEE 34 bus standard at different points. DG placement site selection method based on buses decreased voltage over the limit permitted. Simulation results from a case study on the IEEE 34 bus standard system show that the voltage profile on each bus and the loss of system power will be different when compared to the DG installation at different points. [ABSTRACT FROM AUTHOR] |
Databáze: |
Complementary Index |
Externí odkaz: |
|