| Autor: |
Mitra, Dipankar, Kabir, Kazi Sadman, Clevelenad, Jerika, Striker, Ryan, Braaten, Benjamin D., Shengrong Ye, Roy, Sayan |
| Předmět: |
|
| Zdroj: |
Applied Computational Electromagnetics Society Journal; Nov2020, Vol. 35 Issue 11, p1286-1287, 2p |
| Abstrakt: |
The technology of additive manufacturing results in 3D printing of conductive traces in radio frequency circuits. This creates a plethora of possibilities in realizing flexible and wearable electronics. While the prototypes of microstrip transmission lines and antennas have been recently reported, there is now a need of Electromagnetic Compatibility based study of such 3D printed conductive traces. This paper presents a comparative study on the near end and far end unintentional crosstalk components between a pair of microstrip transmission lines made of Copper in the presence of a 3D printed conductive trace made of a commercially available conductive filament, Electrifi. Any physical contact with the 3D printed trace has been purposefully averted to discard the high contact resistance between the trace and such contacts. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
