| Abstrakt: |
We investigated the opportunities for obtaining hexaferrites Pb1−xLaxFe12−xZnxO19 (x = 0–1) from citrate–glycerin gel and showed that synthesis occurs via the formation of the Fe3O4 phase; products with a small amount of hematite impurity Fe2O3 can be obtained after firing at 800 to 900 °C with 0 ≤ x ≤ 0.5. If x > 0.5, perovskite-like LaFeO3 is formed in samples, so that if x = 0.9–1, the synthesis products virtually do not contain phases with hexaferrite structures and represent a mixture of LaFeO3, Fe2O3, and Fe3O4. Within the range of 0 ≤ x ≤ 0.5, the electrical and magnetic characteristics of hexaferrites Pb1−xLaxFe12−xZnxO19 are slightly dependent on x and have the following average values: A relative permittivity ε/ε0 ~ 45, a dielectric loss tangent tan δ ~ 0.6, an electrical resistivity R ~ 109 Ohm cm, coercivity Hc ~ 3 kOe, saturation magnetization Ms ~ 50 emu/g, and remanent magnetization Mr ~ 25 emu/g. The magnetoelectric (ME) ceramics 50 wt.% PZTNB-1 + 50 wt.% Pb1−xLaxFe12−xZnxO19 (PZTNB-1 is an industrial piezoelectric material based on lead titanate zirconate (PZT) do not contain impurity phases and have the following characteristics: Piezoelectric coefficients d33 = 10–60 and −d31 = 2–30 pC/N, piezoelectric voltage coefficients g33 = 2–13 and −g31 = 1–5 mV m/N, an electromechanical coupling coefficient Kp = 0.03–0.13, magnetic parameters Hc = 3–1 kOe, Ms = 50–30, and Mr = 25–12 emu/g. The maximum ME coupling coefficient ΔE/ΔH ~ 1.75 mV/(cm Oe) was achieved with x = 0.5. [ABSTRACT FROM AUTHOR] |
