| Autor: |
Liu, Yanying, Li, Jianling, Yu, Yang, Huo, Xiaogeng, Zhong, Jianjian, Yang, Zhe, Li, Ranran |
| Předmět: |
|
| Zdroj: |
International Journal of Energy Research; May2020, Vol. 44 Issue 6, p4717-4726, 10p, 3 Diagrams, 5 Graphs |
| Abstrakt: |
Summary The layered lithium‐rich manganese‐based cathode material (Li1.2Mn0.54Co0.13Ni0.13) has the significant advantage of high specific capacity, but this material also suffers serious defects, including severe capacity attenuation and voltage attenuation during the cycle. At present, most researchers have been working to optimize the cycle performance of lithium‐rich materials. In this work, we propose a surface homogenizing heterostructure coating induced by MXene modification to reduce capacity reduction and voltage decay. It can be found that the initial Coulombic efficiency (ICE) increases from 77.2% for the bare electrode Li1.2Mn0.54Co0.13Ni0.13 (LMO) to 85.5% for 1.4 wt% MXene (Ti3C2Tx, Tx represents the surface terminations: OH, O, F) modified lithium‐rich (TO2). Furthermore, the discharge specific capacity of the electrode at 5 C rate increased from 160.7 mAh g−1 for LMO to 200.6 mAh g−1 for TO2. More prominently, the outstanding cycle stability with capacity retention rate is 82.1% for TO2 after 200 cycles, while only 64.7% for LMO, and the average discharge voltage dropped from 0.788 to 0.468 V. In addition, the mechanism for improving the electrochemical performance is systematically studied. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
