Experimental research on the MRR of ultrasonic vibration aided electric discharge milling of ceramic materials using deionized water as processing medium.

Autor: Chang, Weijie, Xi, Yanying, Li, Haowei, Chen, Shunhua, Dong, Bolin, Yang, Qin, Zhang, Jianhua
Předmět:
Zdroj: Machining Science & Technology; 2020, Vol. 24 Issue 1, p136-150, 15p
Abstrakt: Electric Discharge Milling Machining (EDMM) simplifies the electrode manufacturing process and reduces the cost. However, the introducing of new parameters, such as the three-dimensional motion and the electrode rotation speed, results in a periodic change of control state that can reduce the control performance and processing efficiency. In this work, ultrasonic vibration of tool electrode was used to improve the processing efficiency of ceramic materials. The effect of ultrasonic vibration on the EDMM process was analyzed by comparing the experimental findings. The results have shown that the ultrasonic vibration can improve the material removal rate, and a treble processing efficiency was achieved. The effect of processing parameters on the material removal rate, such as the open voltage, the peak current, the pulse during time and the pulse off time, was analyzed. When aided with the ultrasonic vibration, the best processing efficiency was achieved at 220 V for the open voltage, 10 A for the peak current and 15 μs for both the pulse during time and pulse off time. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje