| Autor: |
Okamura, M., Beebe, E., Ikeda, S., Kanesue, T., Raparia, D., Muench, L., Karino, T., Haba, H. |
| Předmět: |
|
| Zdroj: |
Review of Scientific Instruments; Jan2020, Vol. 91 Issue 1, p1-5, 5p, 5 Color Photographs, 1 Black and White Photograph, 3 Charts, 1 Graph |
| Abstrakt: |
To investigate the chiral magnetic effect, 96Zr and 96Ru beams were accelerated at the relativistic heavy ion collider (RHIC) during Run-18 at Brookhaven National Laboratory. The 96Zr beam was provided from the electron beam ion source (EBIS) injector, which consists of a laser ion source, an EBIS high charge state ion breeder, a 300 keV/u radio frequency quadrupole, and a 2 MeV/u interdigital H type drift tube linear accelerator (IH-DTL). The natural abundance of 96Zr is only 2.8% with about 50% of 90Zr. To obtain a sufficient beam current, Zr material enriched to about 60% of 96Zr was used. The only available form of the enriched material was zirconium oxide (ZrO2) powder, which was not well suited for a laser ion source target. We studied and established a sintering technique of the ZrO2 powder to make a solid sample which could be installed into the laser ion source. The singly charged Zr was produced in a laser ablation plasma, extracted, and delivered to the EBIS to be ionized further to 96Zr16+. We optimized the laser irradiation condition, the EBIS confinement time, and transport through the RF linacs to maximize the performance of the injector. The total number of shots provided from the laser ion source for injection into the EBIS was 489 910. The EBIS facility provided a 192 MeV stable beam of 96Zr16+ ions to the booster ring of alternating gradient synchrotron (AGS) for further acceleration and stripping in the AGS/RHIC complex, allowing for successful data acquisition at the Solenoidal Tracker at the RHIC. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
