| Abstrakt: |
In the development of industrial life, an enormous amount of silica fume (SF) has been accumulated and cannot be reused properly and a large quantity of rare-earth elements in industrial wastewater has been inappropriately discharged, both of which pose a threat to human health and the environment. By using UV photocatalytic grafting technology, a polymer brush grafted from modified SF,which can be used as a high efficiency adsorbent, can solve both problems at the same time. Specifically, SF was firstly silanolfunctionalized by γ-methacryloxypropyltrimethoxysilane (KH570), then grafted with polyacrylic acid brushes by UV photocatalytic grafting to finally obtain the adsorbent. Under optimal conditions, adsorption capacity of the adsorbent for dysprosium(III) (Dy3þ) could reach 278.49 mg/g. It took 1 min for the adsorbent to reach adsorbing equilibrium at a relatively low concentration of Dy3+ (40mg/L) and only 3min at a medium and high concentration (130 mg/L and 200 mg/L). After six adsorption-desorption cycles, the adsorbent still possessed high adsorption capacity for Dy3þ (251.20 mg/g). The adsorption behavior of the adsorbent fit the Langmuir isotherm model (R2 >0.97) and pseudo-second-order kineticmodel (R2 >0.98) well. The functional group of carboxylate anion, -COO- played a central role during the adsorption process, which was verified by Fourier transform infrared and X-ray photoelectron spectroscopy analyses. [ABSTRACT FROM AUTHOR] |
