| Autor: |
Hansson, Lars, Couceiro, José, Fjellner, Bengt-Arne |
| Předmět: |
|
| Zdroj: |
Wood Material Science & Engineering; Aug2017, Vol. 12 Issue 4, p251-256, 6p |
| Abstrakt: |
The aim of the present work was to use the displacement information generated from the spatial alignment in order to compute wood shrinkage in the radial and tangential directions in computed tomography (CT) images, and to compare the results with those obtained with computer-aided design software on the same images. To estimate the shrinkage coefficients from tomography images, wood specimens in the green state, equilibrium moisture content 15% and 8% state and oven dry condition were scanned. Specimens were taken from Norway spruce and Scots pine logs. The root-mean-square-error calculations showed acceptable small differences between the two measuring methods, which means that the algorithm is a useful tool for estimating the shrinkage coefficients in radial and tangential direction from CT images. This provides an image processing tool to monitor the dimensional changes during the drying and heat treatment process. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
