| Autor: |
Riviere, Jerome, Douyere, Alexandre, Oree, Shailendra, Luk, Jean-Daniel Lan Sun |
| Předmět: |
|
| Zdroj: |
Progress in Electromagnetics Research C; 2017, Vol. 77, p101-110, 10p |
| Abstrakt: |
This paper presents the design and fabrication of a coplanar waveguide (CPW) rectenna using a sequential modular approach. The rectenna is printed on high permittivity, low-loss board ARLON AD1000 (ϵr = 10.35 and tan δ = 0.0023 @ 10GHz). The rectifier section is realized with a single reverse-biased schottky diode SMS-7630 in reverse topology for which a diode model is obtained at -20 dBm for frequencies F0 = 2.45 GHz and 2F0 = 4.9GHz. The low-pass filter and the impedance matching are synthesized from passive CPW structures. Co-simulation technique is used to overcome CPW simulation limitations and to integrate the diode characteristics. The antenna consists of a circular slot loop antenna with stub matching such that its input impedance is close to 50 Ω. The goal of this work is to design a rectifier to simplify and speed up the fabrication process of a rectenna array. We reduced the number of processes to etch the rectifier on the board and minimized the number of lumped elements. At -20 dBm, simulation of the rectifier with an ideal impedance matching network shows rectification at 2.45 GHz with efficiency of 12.8%. The rectifier and rectenna show efficiency of approximately 10% at an operating frequency of 2.48 GHz. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
