| Abstrakt: |
The direct and selective extraction of Am(III) from simulated PUREX raffinate is demonstrated using a novel combination of the lipophilic extractant CyMe4BTPhen (2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydrobenzo[e]-[1,2,4]triazin-3-yl)-1,10-phenanthroline) and the hydrophilic complexant TEDGA (N,N,N’,N’-tetraethyl-diglycolamide) to enhance selectivity toward Am(III) extraction. Separation factors (SF) of up toSFAm/Cm= 4.9 were observed in tracer experiments using this combination of CyMe4BTPhen and TEDGA. Distribution ratios of stable isotopes of fission and activation products contained in a simulated PUREX raffinate solution are reported for the first time with CyMe4BTPhen, and some co-extracted metal ions are identified. The metal ions partly co-extracted from the simulated PUREX raffinate solution were Cu, Pd, Cd, Ag, Ni, and to a lesser extent Sn and Mo. The co-extraction of Pd and Ag was successfully suppressed using Bimet ((2S,2’S)-4,4’-(ethane-1,2-diylbis(sulfanediyl))bis(2-aminobutanoic acid)). The extraction was also studied as a function of the TEDGA concentration. The distribution ratios of Am and Cm can be adjusted by variation of the TEDGA concentration to yieldDAmvalues >1 andDCmvalues <1. Separation factors for Am(III) over Cm(III) of up toSFAm/Cm= 2.4 were observed in these experiments. For Ln(III) + Y(III), distribution ratios below 1 were observed, thus enabling a direct extraction of Am(III) from simulated PUREX raffinate with a sufficient selectivity against trivalent lanthanides and Cm(III). [ABSTRACT FROM AUTHOR] |
