| Abstrakt: |
The oil-impregnated paper, which is the major section in converter transformer, plays a considerable role in the reliability and safety of power grid. However, the insulation degradation will be accelerated by the accumulation of charges that are on the surface of oil-impregnated paper. Therefore, the operating overvoltage occurs and irremediable damage will appear. Direct fluorination is an effective method of modifying the chemical components of polymer matrix so as to have effects on the surface characteristic of the insulating material without reforming the bulk properties. In this research, for studying effects of fluorination on charge behavior on the surface of oil-impregnated paper under the application of DC and impulse voltage, the F2/N2 compound, which the volume fraction for the F2 gas occupied 10 % and the pressure was 0.05 MPa in a reaction kettle for 5, 30 and 60 min respectively, was applied. Meanwhile, the chemical bond groups and the surface morphology of the fluorinated specimen were tested. Besides, the DC voltage amplitude was 4 kV and the applied time was 4 min. The impulse frequency was 500 Hz and the impulse voltage amplitude was 1, 2, 3 and 4 kV, respectively. The charge properties under various situations were investigated. From the research under the application of different fluorination time, impulse voltage amplitudes and polarities, conclusions can be drawn that, fluorination has significant effects on the chemical structure properties and surface characteristic of oil-impregnated paper. Furthermore, the initial potential can be reduced and the decay process of surface charge can be accelerated with different fluorination time increasing from 0 to 30 min. Nevertheless, the tendency is the opposite when the fluorination time continuously extends from 30 to 60 min. The trap distribution also exhibits alternation through the fluorination. [ABSTRACT FROM PUBLISHER] |
